Waterproofing Solution

CMA100® ULTRA CLEARSEAL

Is a high-performance liquid waterproofing solution that reacts with calcium in fully cured concrete to form a durable calcium silicate hydrate gel.
This gel seals cracks up to 2.2mm and remains active to seal future hairline cracks on contact with water.
Increases the bond of concrete to cementitious materials by 80%
Protects against water, chloride and sulphate ingress; increases resistance to chemical attack
Environmentally friendly and non-toxic, it offers permanent waterproofing without the need for reapplication.

Is a two-component, quick-setting sealant designed for urgent sealing and repairs of joints and cracks in concrete structures.
Non-toxic solvent-free, non-flammable, odour-free, suitable joint sealant solution for poor ventilated tanks. Environmentally friendly.
Excellent weathering resistance and UV-Rays resistance, without yellowing process.
Withstands joint movement up to 15%
Can be painted once “cured”. Will take negative as well as positive pressure when cured.
Resistant to marine water, waste water, soil water etc with presence of salts, subplates, chlorides

Is a one-component cement-based mortar. Once mixed only with water, it provides a high-performance flexible coating, for waterproofing and protection of concrete against positive and negative pressure.
Good crack-bridging capability of the concrete (.0.5mm).
Acts as the anti-fracture membrane between the substrate and other finishing coats if applied.
Allow water vapour diffusion and the breathability of the concrete.
Resistant to abrasion and UV RAYS.
Excellent adhesion. Do not require primer and can be applied on wet surfaces.
Non-toxic, suitable for contact with potable water.
Longer lasting that other coatings, avoiding maintenance costs.
Environmentally friendly and suitable for application in poor ventilation areas.
Withstands the root penetration.

It’s a woven fiberglass mesh designed for use with waterproofing coatings to reinforce and strengthen in areas subject to movement.
Its open weave structure allows full adhesion between coats of waterproofing products like MAXSEAL FLEX, ensuring a seamless bond without forming a barrier.
Ideal for reinforcing cold joints, such as where brick walls meet concrete slabs, MAXMESH remains strong and flexible throughout the application.
Easy to apply, it embeds into the first wet coat of waterproofing, providing long-lasting support without being visible through the final coat.

Is a quick-setting cement-based mortar, instantly stop running water from cracks, fissures, holes or other openings in concrete masonry.
Emergency repairs on concrete water pipes. For broken concrete pipes MAXPLUG® will even work when the concrete pipes under hydrostatic pressure. Eg: Plugging of gas leaks.
It is non-shrink and sets within three to five minutes depending on the temperatures.
Non-toxic. It can be used in contact within drinking water.
Does not contain chlorides or other corrosive compounds.
Stopping running water in basements, tunnels foundation and sewers under. It sets even underwater.
It’s a mechanical properties are similar or higher than concrete.